TUMBLE-BLAST MACHINES

Model T-86

Fully automatic loading and unloading of components in the T-86 permits unmanned operation, with PLC-controlled blast and airwash cycles. The T-86 tumble-blast machine has a 44" x 60" machine footprint.

Up to 4 suction-blast guns or 2 pressure-blast nozzles are bracketed in position over the mouth of the perforated steel tumble-basket to cover the batch of components as they turn over and over. The rotation speed of the basket is adjustable, so you can optimize the tumbling action for the most efficient process cycle. At the end of the timed blast cycle, an automatic airwash blow-off cycle removes media and dust from the parts as they continue to tumble. Then the finished parts are discharged through the automatic chute at the bottom-front of the cabinet, and the upper in-feed hopper loads the next batch. Dead time between cycles is minimized in nearly continuous operation – in fact, the T-86 can out-produce tumble-blast machinery of much larger cubic capacity and dramatically reduce your manpower requirements.

Guyson application engineers can assist you in planning automation of your external material handling, such as conveying of parts to and from the unmanned tumble-blast system, including tie-in of associated equipment to the powerful programmable logic controller of the Model T-86.

The Model T-86 tumble-basket holds up to 1 cubic feet. of components weighing up to 150 pounds. The maximum quantity of parts per batch depends on your component and the purpose of blast treatment.

The Guyson design eliminates harsh part-on-part impingement to prevent damage of fragile components. Our original tilted basket design tumbles components more gently and creates better circulation of components in the batch. The result is more thorough coverage in a shorter processing cycle and more uniform surface condition or finish – on all areas of each part, from one component to another and from one batch to another.