Introducing The AR-MAX:
Blast Finishing System For the Firearms Industry
The AR-MAX is built for productivity!
Three custom satellite tables for holding parts can blast up to 400 parts per hour, depending on your component size. Every part will get full blast coverage during the cycle time. When compared to a manual blast cabinet, the AR-MAX can reduce a process of several minutes down to 10 seconds per component.
The AR-MAX will increase your production levels, shorten turn around time, and will quickly pay for itself.
The AR-MAX is an all-in-one solution
Installation is easy, no expensive footing or air system needed. Place it on a concrete floor, and plug it in. You’re ready to go.
Our machine has the added convenience of being able to fit in tight spaces with a small footprint of 9.5x11ft. including the reclaim system and dust collector.
All of this makes the AR-MAX the most productive prep for finish system in the firearms industry.
Custom satellite tables for part loading
Guyson has not forgotten gun AR-15 accessory manufacturers
Prep your Flashlights, Scopes and Silencers, even night vision goggles for the perfect anodized or Cerakote® finish.
Technical Data for the AR-MAX
|Typical Cycle Time||300 parts per hour|
|Approximate Floor Space Required||11″ x 9’2″|
|Overall Machine Height||11’5″|
|Table Diameter||39 ½”|
|Maximum Work Opening||16″ H x 34″ W|
|Maximum Table Capacity||2,000 Pounds|
|Abrasive Flow Rate (approximate)||250 Lb./Min.|
|Abrasive Quantity for Initial Charge||440 Pounds|
|Blastwheel Motor||10 HP|
|Elevator, Abrasive Sieve and Rotating Table Geared Motor||2 HP|
|Dust Collector Fan Motor||¾ HP|
|Total Installed Horsepower||12 ¾ HP (5.7 kw)|
|Work Table Speed||6 RPM|
|Shipping Weight||3,400 Pounds|
|Ventilation Capacity||400 CFM|
|Dust Collector Cartridges||One|